Notes for operation of high speed bag-making machine
1. Turn on the main power switch of the machine tool to check whether there is electricity leakage in the high-speed bag-making machine. Preheat the barrel and mold according to the set process temperature requirements. If no abnormal phenomenon is found, the oil pump can be started formally. Only after "motor on" appears on the screen can the oil pump operate and check whether the function of the safety door is normal.
2, manually start the screw rotation, check whether the screw rotation sound is abnormal and stuck.
3, the operator needs to use the safety door, such as the safety door travel switch failure is forbidden to boot, do not use the safety door (cover) operation.
4, the electrical equipment, hydraulic and rotating parts of the various cover, protective cover, etc., to cover, fixed.
5. If the operator is not on duty, it is forbidden to press the buttons and handles without consent. Two or more people are not allowed to operate the same high-speed bag-making machine together.
6, machine repair or a long time (more than 10 minutes) finishing the mold, the first injection seat back so that the nozzle leaves the mold, turn off the motor, maintenance personnel repair the machine, the operator shall not take off the post.
7. When the body enters the machine tool or the mold opens, the power needs to be cut off to avoid the danger zone. When finishing the nozzle glue head, do not use hands directly, use pliers or other things to avoid scalding. Climb and place objects to avoid burning, electric shock and fire.
8, in the hopper is not the case of cutting, do not use metal rod, rod, rough poking hopper, avoid damage to the hopper split screen, screen cover and magnet frame, if the screw rotation state is easy to produce metal rod involved in the barrel of severe damage to the equipment.
9. In case of abnormal sound, peculiar smell, spark, oil leakage and other abnormal conditions of the high-speed bag-making machine found in the operation of the machine, the machine should be shut down and reported to relevant personnel, and explain the fault phenomenon and possible causes.
10, pay attention to safe operation, do not allow to do may cause damage or damage to the equipment operation.
